This is a keepsake box for a new born named Ellie. It is a copy of a box made in the Connecticut River Valley in Massachusetts between 1695-1725. Wallace Nutting calls it a trunk in his book Furniture Treasury.
I painted it green to emphasize the symbolism of the the growing vine, and a new life.
The pattern of the carving is an expanded version of the pattern on Hadley chests. In fact, I used the same pattern that I used for Ellie’s parents wedding chest, and it fit the boxes measurements perfectly. I just “grew” the vine to fit the height of the box.
I made the box out of a wide board of sassafras that was re-sawn into half inch thick sides. Sassafras has a wonderful smell and carves well, the original was made from riven oak with a pine lid and bottom. Ellie’s box is joined by half blind and through dovetails. I made another box joined with nails and a rabbet like the original.
The carving on this box is more “developed” than most Hadley chests because it is carved partially in the round, it is still charmingly naive and child like. The ground of the carving has been dressed with punch-work.
Here is a bible box I made in comparison. Ellie’s trunk is 25 1/2″ long, 16 1/4″ wide, and 9 1/2″ high
This is a commissioned book case that I’ve just completed. It is made of cherry, with an oil, shellac and wax finish. It was designed to divid the space between a kitchen and great room and be accessible from both sides, one side is open and the other has doors. The case is quite large, 54″ long 36″ high and 22″ deep.
The case is a good height for a serving station during parties.The shelves accommodate most art books.
Hand cut half-blind dovetails join the sides of the case which sits on a frame supported by ogee bracket feet.
It is a small detail, but I think it makes this simple little box something special. This piece is based on a early Queen Anne box but I’ve pushed it a little further back to William & Mary. An interesting time for cabinet makers. In fact it was when cabinet makers started to come into their own. Before then they were called joiners and would have also been building houses and using the same “joinery” for both.
So here we have a box that is nailed together with a dovetailed drawer inside. The top is covered with walnut crotch veneer and edged with walnut cross banding. The drawer front and sides are solid, highly figured walnut. The drawer sides are made of sassafras, a local aromatic hardwood.
Oh, so the detail. It’s the hand cast brass hardware. They help give an interesting rhythm,with the feet, to the facade.